Search:

How to Install a Ceiling Fan

Ceiling fans don't just serve to air out a stuffy, warm or smelly room. Ceiling fans also add a lot of charm and beauty to a themed room. At the same time, a ceiling fan can help you save on your electric bills. This is probably why more and more people are starting to get interested in fans. If you want one of these functional decorations, you might want to know how to install a ceiling fan. It might be easier than you think.

Check Your Ability

The first step to know how to install a ceiling fan is to find out first if you have the aptitude for basic electrical procedures. It may be easy for some but learning how to install a ceiling fan really does require a basic feel for electrical wiring.

You also need to have some idea about the building codes in your specific locality. The building codes will tell you the exact allowable installation requirements and procedures such as fan height. If you are unsure about how to proceed or simply can't understand the product instructions, then you should ask a qualified electrician to install the ceiling fan for you.

Choose the Fan

If you are sure that you can follow the basic steps to how to install a ceiling fan then you should proceed to choosing your fan. There are many ceiling fan designs now including those with lights. You have to check your circuit capacity though if you want to install a fan with lights since your circuit could overload. Be sure too to have a look at the diameter of the fan so that it is just right for the room.

One good advice about learning how to install a ceiling fan is that you should only attempt to do so if there are already existing available wires on site. In this case, a product may already come with a manual that may help you with the installation.

DIY: How To Install A Ceiling Fan

Take note that the following instructions are simplified and will only work if there is an existing wired fixture. The first thing you have to do is to turn off the power or circuit off and remove the fixture. Once the fixture has been removed, you should check the present workbox or electrical box. The box should have a firm support and if that is not available in the old set-up then you should install braces in between the joists.

The next thing that you have to do is to connect the mounting bracket to the workbox. You can make the attachment easier for you to do by using the bracket and hook to hold the pre assembled fan while you attach. Once the bracket is in place, connect like colored wires to each other with wire nuts. After the wiring is done, attach the canopy or cover of your fan.

The last thing you have to do is to install the blades and cover. The product manual may have specific instructions on this. Test the fan by turning on the power. If the fan doesn't function or if it wobbles, you may have to check the parts and connections again.